String Seperation

[Ioannis]

SKIP is good but the Serin2 must be well synchronized at the beginning of the transmision.
CASE Else the variables will me messed up!

Is there a start sentinel before the "t=00 b=000 r=00 st=00000 sp=00000" so that a WAIT modifier can be used?

Ioannis

[b1arrk5]

Ioannis,

I was assuming that not all of the bytes would be in ascii, I have a device that I communicate with that sends ascii labels like "b=" and then sends hex values as the variables change. That's why I suggested that he might want to send the buffer[3] byte out to an lcd, just to make sure. I know I went nuts testing with hyper-terminal, because it kept taking the hex values and converting them to ascii characters and printing out nonsense.

Jerry.

[Ioannis]

...
I know I went nuts testing with hyper-terminal, because it kept taking the hex values and converting them to ascii characters and printing out nonsense.
...

Yes, I understand what you mean... 8-)

Ioannis