Maximun Cable Length for PIC to LCD

[wildbilly]

Hi Darrel. I have installed MPLAB IDE v8.00 Full Release and setup was done as mentioned.
Now when compiled I get the MPASM window showing the process and then shows 18 errors.
This goes by very fast and starts green and then goes red. The errors are similar to what I had before. Here are a few. I have omitted the path for each error.

205 : Found label after column 1. (WritePort)
205 : Illegal opcode(_Char)
234 : Illegal opcode(_LCD_DATAUS)
249 : Found label after column 1.(DelayUS)
267 : Illegal opcode(LCD_COMMANDUS)

and many more

[Darrel Taylor]

Arrrrgh!

Sorry to put you thru all this, it shouldn't be that hard.

I can't really say what's happening from the errors you showed.
I could probably see what's wrong if you could send the .LST file.

It'll be too big to post, but you could email it to
darrel at pbpgroup.com

It should've worked
<br>

[nomad]

you all must have cringed when i posted my first blinky on bread board. lol mine are true ratsnests. guess it's time to buy some neato jumpers and stop being a disgrace. sniff lol