Yeah! He is indeed very neat. I am inspired to do the same. The background looks like a chair seat. Darrel your wildbilly.hex file ran ok. I have never used MPASM. I should try and get it going.
Thank you.
|
Yeah! He is indeed very neat. I am inspired to do the same. The background looks like a chair seat. Darrel your wildbilly.hex file ran ok. I have never used MPASM. I should try and get it going.
Thank you.
|
DING! Give that man a cigar.The background looks like a chair seat.
I forgot to answer it. oops.
Just go here... at the bottom of the page, install the MPLAB IDE v8.00 Full Release Zipped InstallationI have never used MPASM. I should try and get it going
http://www.microchip.com/stellent/id...&part=SW007002
Are you using MicroCode Studio for the IDE?
<br>
DT
|
one of the less neat prototype i've never ever saw ...
http://www.botmag.com/articles/bionic_stamp.shtml
Steve
It's not a bug, it's a random feature.
There's no problem, only learning opportunities.
|
Hi Darrel. I am using Microcode Studio.
|
Great. That makes it easy.
After installing MPLAB ...
In MCS, go to the View | Compile and Program Options | Assembler Tab
Click the Find Manually ... button and point it to
C:\program files\microchip\mpasm suite
Then check the Use MPASM checkbox.
You should be good to go.
<br>
DT
|
OOPs, one more thing to get that to compile.
In your PBP folder, open the 16F877A.INC file, and comment out the __config line with a semicolon ;
Now you should be good to go.
mister_e,
At least now I know where to go if I need some extra wire.
Sheesh.
<br>
DT
|
Hi Darrel. I have installed MPLAB IDE v8.00 Full Release and setup was done as mentioned.
Now when compiled I get the MPASM window showing the process and then shows 18 errors.
This goes by very fast and starts green and then goes red. The errors are similar to what I had before. Here are a few. I have omitted the path for each error.
205 : Found label after column 1. (WritePort)
205 : Illegal opcode(_Char)
234 : Illegal opcode(_LCD_DATAUS)
249 : Found label after column 1.(DelayUS)
267 : Illegal opcode(LCD_COMMANDUS)
and many more
|
Have a look at the last lines of the link... About The Author..Originally Posted by Darrel Taylor
mister_e,
At least now I know where to go if I need some extra wire.
Sheesh.
<br>i'm afraid
Steve
It's not a bug, it's a random feature.
There's no problem, only learning opportunities.
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks