rf problem

Results 1 to 10 of 10

Thread: rf problem

Threaded View

  1. - 20th November 2007, 14:39 #2
    mister_e's Avatar
    mister_e
    mister_e is offline Contributor
    Join Date
    Sep 2004
    Location
    montreal, canada
    Posts
    6,898

    Did you find this post helpful? Yes | No

    Default

    If you're using 1 PIC, your example is not going to work as it can't receive at the same time he send. Using the PIC hardware Usart may work with some tricks such as USART interrupt.

    As always, your PIC # and schematic would be welcome

    Make sure your module are not to close from each other, your supply lines are clean/noise free, and the output signal of your receiver is also noise free in idle mode.
    Last edited by mister_e; - 20th November 2007 at 14:42.
    Steve

    It's not a bug, it's a random feature.
    There's no problem, only learning opportunities.
« Previous Thread | Next Thread »

Similar Threads

  1. problem with sending data using RF module
    By rano_zen06 in forum mel PIC BASIC Pro
    Replies: 51
    Last Post: - 10th April 2008, 17:08
  2. Problem with manchester code for RF
    By Dhanushka in forum mel PIC BASIC Pro
    Replies: 11
    Last Post: - 6th August 2007, 11:46
  3. RF range problem
    By George in forum Off Topic
    Replies: 10
    Last Post: - 19th March 2007, 04:11
  4. a problem RF Signal with PULSIN
    By muskut in forum mel PIC BASIC Pro
    Replies: 6
    Last Post: - 22nd July 2005, 16:42
  5. problem with RF receiver
    By nanami7702002 in forum mel PIC BASIC Pro
    Replies: 13
    Last Post: - 31st January 2005, 21:55

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules