New to PICBASIC Pro and have simple question

[Pic_User]

I didn't want to start another thread for this question.

Is there any way to take a signal coming in on one pin and output that same signal on another?

I don't know if the signal is digital or analog so it's not like I can just set it to high, low, or any pulse commands.

Any idea how this can be done?

Hi plyrathrt,
If you want to switch an unknown (low frequency AC) or (DC signal), with a PIC, you could use a relay.
Your unknown signal would come in one contact, and you could chose when to switch it to the other contact(s).

<img SRC="http://www.picbasic.co.uk/forum/attachment.php?attachmentid=2280&stc=1&d=120095554 4">