[QUOTE=plyrathrt;46409]

Anyone know of a good thread or link to a site that has a good explanation of the "button" command, how it works, and examples?

> plenty of downloads Here !!! everything is good to learn as it's PbP fully compatible !!! :

http://www.parallax.com/Education/Pr...5/Default.aspx

I would really like to use this command instead of using high and low. That way I don't have to put resistors to a ground for every input pin in my project

> High and low apply to Outputs ... no link to "Button" function !!!

You'll always have to use pull up/down resistors for inputs whatever the way you read them .... yesss, that's it !!!

Alain