Display the value of a resistance to LCD

[HenrikOlsson]

Hi Joe,
I'm not sure but try changing the left/right justified setting on the ADC. Your not saying which PIC you're using but on the 16F688 for example, you set that with bit0 of ADCON0 though it may be different on other PIC's - see the datasheet for your PIC.

Let me know how it goes.

/Henrik.

[joseph Degorio]

Hi Henrik,
I'm using 16F876A, I did some trial and error and finally got it. But I use this formula..
Adval=Adval*100/255 'gives the range 0-100
But I used Define ADC_BITS 8.

Thanks for your guidance.
joe