Sending menu to PC from PIC16F876A

[mister_e]

Unless your configuration fuse setting is wrong or your you have a hardware problem, it has to work AS-IS... at least your PC have to receive your first text strings.

What are you using to receive your strings? The painful & useless Hyperterminal or MicroCode Studio?

[joseph Degorio]

Hi Steve,
I just found out that if I remove the line with this command "serin PORTC.7, 0, RX 'Receive menu" the menu displays to the serial comm window. According to Labx2 schematic RX is PortC7. Please guide me...


Thanks in advance,
Joe