Gasoline consumption Math

[Luciano]

I read the time that one injector keep open in 500 ms.

Hi Sérgio,

The injection time will change depending on the load of the engine.
The pressure of the fuel is constant, the supply of the fuel is
controlled by the injection time.

Best regards,

Luciano

EDIT:
(See next post)

I have cleaned my glasses now, but I'm not sure that was the problem!

Sorry about that!

Luciano

[Acetronics2]

Hi Sérgio,

The injection time will change depending on the load of the engine.
The pressure of the fuel is constant, the supply of the fuel is
controlled by the injection time.

Best regards,

Luciano

Hi, Luciano

500 ms: It's the time to make the consumption mesure ... let's say for an average consumption on a 500 ms period !

Alain

[srspinho]

Hi Guys !

I think my problem is almost fixed.

I decided to implement the solution using some intermediate variables counting the amount of fuel used (milliliters and decilliters ) and making calculations for each 100 meters. If the division cannot be performed, the display shows "- -", like in some on-board computers I have seen.

I just have to bootload the new software and run some kilometers in the traffic here in Sao Paulo.

Well guys . . . Thank you for your advices ! ! !

Regards

Sérgio