16F88 and TMR0 Interrupt - where's the fish?

Results 1 to 7 of 7

Threaded View

  1. - 5th November 2007, 07:54 #7
    flotulopex's Avatar
    flotulopex
    flotulopex is offline Senior Member
    Join Date
    Aug 2006
    Location
    SWITZERLAND (french speaking)
    Posts
    943

    Did you find this post helpful? Yes | No

    Default

    I set bits <2:0> to specify the oscillator's mode selection (set in the config Word).

    Oooops! Just found I forgot to set the TMR0 prescaler rate in the OPTION_REG register...

    Everything is fine now.

    Thanks a lot.
    Last edited by flotulopex; - 5th November 2007 at 08:29.
    Roger
« Previous Thread | Next Thread »

Similar Threads

  1. Instant Interrupts - Revisited
    By Darrel Taylor in forum Code Examples
    Replies: 772
    Last Post: - 17th February 2016, 23:14
  2. DT inst. interrupt & Timer0 with pic 16F88
    By aratti in forum mel PIC BASIC Pro
    Replies: 6
    Last Post: - 17th December 2009, 22:23
  3. Problem with 16f88 steep motor control
    By ken_23 in forum Off Topic
    Replies: 0
    Last Post: - 4th July 2008, 13:25
  4. Ping Darrel Taylor - Timer0 Instant Interrupt
    By JEC in forum mel PIC BASIC Pro
    Replies: 4
    Last Post: - 9th January 2007, 12:20

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules