Check the data sheet for this PIC. Several PORTB pins are analog intputs at power-up, and
you'll need to write to OSCCON to configure it for 8MHz internal.
The default value in OSCCON at reset is for 1MHz.
|
Check the data sheet for this PIC. Several PORTB pins are analog intputs at power-up, and
you'll need to write to OSCCON to configure it for 8MHz internal.
The default value in OSCCON at reset is for 1MHz.
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks