Bit Angle Modulation (BAM) in a PIC


Results 1 to 40 of 151

Threaded View

  1. #11
    Join Date
    Aug 2005
    Location
    Michigan, USA
    Posts
    224


    Did you find this post helpful? Yes | No

    Default

    Hi Terry, K9HA,

    Attached is assembler source with "gamma" table. I also slowed down LED "0" fade loop time considerably to look for "stair stepping" effect since I was only using 64 "gamma" steps but the fading is remarkably smooth.

    I'm using Fairchild MV57164 Bar/Dot displays but almost any LED should work fine.

    A couple observations;

    (1) I'm very surprised at the light produced from LED "10" which is set to a duty cycle of 1 (1-usec -> 1/1280th or 0.078125% duty cycle).
    (2) Mirrored BAM doesn't seem to be necessary to correct the 127-128 duty cycle transition visual artifact when using a multiplexed display (with gaps between LED updates).

    Regards and "very 73", Mike, K8LH
    Attached Files Attached Files
    Last edited by Mike, K8LH; - 9th March 2010 at 16:02.

Similar Threads

  1. decoding quadrature encoders
    By ice in forum mel PIC BASIC Pro
    Replies: 93
    Last Post: - 28th February 2017, 09:02
  2. Cordic trig assembly code for PIC18f
    By ScaleRobotics in forum mel PIC BASIC Pro
    Replies: 54
    Last Post: - 8th September 2015, 05:36
  3. AT/PS2 Keybord - PIC Interface?
    By Kamikaze47 in forum Code Examples
    Replies: 73
    Last Post: - 9th August 2009, 16:10
  4. MIBAM - (Mirror Imaged Bit Angle Modulation)
    By Darrel Taylor in forum Code Examples
    Replies: 2
    Last Post: - 15th February 2009, 16:02
  5. Bit Angle Modulation
    By BH_epuk in forum mel PIC BASIC Pro
    Replies: 1
    Last Post: - 18th November 2008, 07:01

Members who have read this thread : 3

You do not have permission to view the list of names.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts