RC Servo Receiver

[Acetronics2]

Hi, Ioannis

Halas, the Rx outputs do not work like that ... and there are many solutions ...

1) classical output ... the signals come from a shift register, so, the second channel begins ~ 10 NANOseconds after channel 1 signal falls ...and so on. ( see 4017 Datasheet ...)

2) µPoutput, here, channels can be outputted 2 per 2 or 3 per 3 ... sequence is i.e. ch1 + 5,ch 2+6, ch3+7, ch4+8 ... leading edge synchronized.

3) and, for some others ( generally old PCM systems ...) Ch, 1,2,3,4,5,6 ...Ch 1,2,3,4,5,7 ...Ch 1,2,3,4,5,8 ...

So, no universal output capture device possible ... you must know wich rx you will "sample" ...

There's a thread about these days on RC Groups :

http://www.rcgroups.com/forums/showthread.php?t=752440

The guy is from china ... "Shanghai fool" ...

Alain