|
QUOTE=DynamoBen
The mosfet can't be moved. I don't know if I have a low ESR cap. I can dig through my parts bin. Anything specific I should be looking for?
> IF I tell you BC Components (ex. Philips ) Series 136 ... ESR <= 22 mOhms ( Milli ...yes ! )
Is this in addition to the above cap?
> The .1µF capacitor must be soldered ON the motor terminals ...
Will try.
> The 10nF are also necessary.
I don't have anything like this lying around.
> Not compulsory, yes ...but highly recommended !!!
Alain
************************************************** ***********************
Why insist on using 32 Bits when you're not even able to deal with the first 8 ones ??? ehhhhhh ...
************************************************** ***********************
IF there is the word "Problem" in your question ...
certainly the answer is " RTFM " or " RTFDataSheet " !!!
*****************************************
|
This seems to be what you are describing.
http://www.kronosrobotics.com/an142/GAN142.htm
Last edited by DynamoBen; - 17th October 2007 at 21:38.
|
Hi, BenOriginally Posted by DynamoBen
Yes ... that's a nice tutorial ... but some tips still missing !!! ( diode, low esr cap, inductor ...)
note here, in this example, motors can be reversed ... so, the diode can't be placed on the motor terminals, but close to the "reversing commutator" ( relay, transistors bridge ...)
Alain
************************************************** ***********************
Why insist on using 32 Bits when you're not even able to deal with the first 8 ones ??? ehhhhhh ...
************************************************** ***********************
IF there is the word "Problem" in your question ...
certainly the answer is " RTFM " or " RTFDataSheet " !!!
*****************************************
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks