Am I heading in the right direction?


Results 1 to 8 of 8

Threaded View

  1. #3
    Join Date
    Jul 2007
    Location
    Maryland, USA
    Posts
    15


    Did you find this post helpful? Yes | No

    Default Update

    I added the fuses into the original post. The home-made schematic is attached to this post.

    MCLR is tied to 5V via 1k resistor

    Problem I'm having at the moment is only LED1 will light up. If I push Switch2 & Switch3, I should get LED2 + LED1..when any combination of buttons are pressed nothing will light up(not working correctly). Unless its a combination, with the first digit being 1 then only LED1 will light up(is working correctly).

    I am not sure how to go about storing the first digit, wait for 30secs until the second digit comes in which I can figure out what pattern of lights to display..

    Hope this helps clarify my situation.
    Attached Files Attached Files

Similar Threads

  1. decoding quadrature encoders
    By ice in forum mel PIC BASIC Pro
    Replies: 93
    Last Post: - 28th February 2017, 09:02
  2. Math help - rolling average Wind Direction
    By wjsmarine in forum mel PIC BASIC Pro
    Replies: 18
    Last Post: - 23rd July 2009, 00:08
  3. How to detect sound direction?
    By Kamikaze47 in forum mel PIC BASIC Pro
    Replies: 7
    Last Post: - 13th December 2008, 04:53
  4. Replies: 10
    Last Post: - 8th April 2008, 21:07
  5. Replies: 5
    Last Post: - 12th September 2007, 15:59

Members who have read this thread : 0

You do not have permission to view the list of names.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts