Touch Sensor

[Pesticida]

Hi,

I have found a very good Device B6TS-04LT,is a 4 Ch Sensor from OMRON.

http://docs-europe.electrocomponents...6b8095df92.pdf

I dont' know how I can put Photos on this Thread :-)

I Build the Sensor Device with a PIC 16F870 all Work Fine,my only Problem is that when I Read something for Example the Device ID (Work just in Setup Mode),sometime i Receive the Right ID sometime just FFFF and so on,I can not Read any other Value I try all Mode and Routines.

I use for Write this:

Include "modedefs.bas" ' Mode definitions for Serout

Define OSC 4

DEFINE HSER_RCSTA 90h
DEFINE HSER_TXSTA 24h
DEFINE HSER_SPBRG 25 ' 9600 Bauds
DEFINE HSER_CLROERR 1

..........
........


' PortB.4 is Data (Duplex)
' PortB.3 is Clock
'SCS is Chip select

'''''''''''''''''''''''''''''''''''''''''''''''''' '''''''''''Write to Register'''''''''''''''''''''''''''''''''''''''''' '''''''''
Low PortB.2 ' SCS
pauseus 10
Shiftout PortB.4,PortB.3,5,[Command.highbyte,Dummy,DatenTX.highbyte,DatenTX.lo wbyte] 'Toggle
pauseus 10
High PortB.2
Sound Summer ,[124,10]
Pause 1000
'''''''''''''''''''''''''''''''''''''''''''''''''' ''''''''''Write to EEPROM'''''''''''''''''''''''''''''''''''''''''''' ''''''
Command.highbyte = %10111111 'Write EEPROM
Command.lowbyte = %00000000
DatenTX.highbyte = %01010011
DatenTX.lowbyte = %01010100
Dummy = $FF
Low PortB.2
pauseus 10
Shiftout PortB.4,PortB.3,5,[Command.highbyte,Dummy,DatenTX.highbyte,DatenTX.lo wbyte]
pauseus 10
High PortB.2
Sound Summer ,[124,10]
Pause 1000


This Work fine !

'''''''''''''''''''''''''''''''''''''''''''''''''' ''''''Read ID'''''''''''''''''''''''''''''''''''''''''''''''' '''''''''''''''''''''
Command.highbyte = %00000000
Command.lowbyte = %00000000
DatenRX.highbyte = $00
DatenRX.lowbyte = $00
Dummy = $FF
Low PortB.2 'SCS
pauseus 10
Shiftin PortB.4,PortB.3,6,[Command.highbyte,Dummy,DatenRx.Highbyte,DatenRx.Lo wbyte]
pauseus 10
High PortB.2 ' SCS

This Code dont' Work all the Time,when I use any other Command I Receive just the ID und not the right Value what I need.

My second question :-) is why I need SCS what is SCS(Chip select).

I try Hours and Hours to find the way but no Result.

Thank you for any answer !

Regards Pesti.