Mutliple ADC problem with PIC16F877

[mackrackit]

I am sorry about not using BASIC, but because I am currently on a school project and we are restricted to C or Asm only therefore. I can't use it. Hope you can understand that.

I understand, I would help and so would many others, but most of us do not use C or at least not very often.

Have you tried the http://www.piclist.com/techref/piclist/index.htm ?

When I was doing ASM I hung out there.

[Srigopal007]

This will not work because if you read the datasheet of the microcontroller.. it specifically mentions that you must have 10 microsecond delay when switching from channels. This is an absolute must, because the processor requires a delay from switching drivers from one ADC channel to another. This is just my assumption.

-Srig