|
which assembler are you using? MPASM?
I know how to do it for MPASM, which is to change ur config to:
__config _INTOSC_OSC_NOCLKOUT & _WDT_ON & _MCLRE_ON & _LVP_OFF & _CP_OFF
u could try this if you dont use MPASM (but i'm not 100%):
@ device pic16F648A, intosc_osc_noclkout, wdt_off, mclr_on, lvp_off, protect_off
Last edited by Kamikaze47; - 18th September 2007 at 19:38.
|
MPSAM..?
???
.
|
Hi xobx,
Microcode studio uses an assembler called PM by default. Mpasm is the assembler used by Microchip. The config listed below is for PM.
@ DEVICE pic16F648, INTRC_OSC_NOCLKOUT, wdt_off, mclr_on, lvp_off, protect_off
<p>
See the link listed below for some fine samples, courtesy of Melanie.
http://www.picbasic.co.uk/forum/showthread.php?t=543.
To use MAPSM as the assembler you have to tell Microcode Studio, to use it.
Last edited by Archangel; - 18th September 2007 at 19:53.
If you do not believe in MAGIC, Consider how currency has value simply by printing it, and is then traded for real assets.
.
Gold is the money of kings, silver is the money of gentlemen, barter is the money of peasants - but debt is the money of slaves
.
There simply is no "Happy Spam" If you do it you will disappear from this forum.
|
Microcode Studio is an editor - To write your code
Picbasic Pro is a compiler - To compile your PBP code into assembly code
MPASM is an assember - To assemble the assembly code into machine code the PIC will understand.
You can check to see if you are using MPASM by going to the View menu in MicroCode Studio, choosing Comple and Program Options, and then clicking the Assembler tab. If Use MPASM is ticked, you are using MPASM.
If that is the case, go to the 16F648A.INC file in your PBP directory, and change "__config _XT_OSC" to "__config _INTOSC_OSC_NOCLKOUT"
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks