x10 - europe FYI

[eleckits]

Hi,

I recently bought a XM10E of Marmitek (TW-523) and was using the Xout commands.
Unfortunately it didn't seem to work.
After reading through the forum a member mentioned something about the "timing in the library file" for the Xout function.
I changed the timing settings and all worked like a charm.

What I did was altering the value 1770 to 2325 in the pbppic14.lib (xout)

Regards,

Can you post the schematic for (TW-523)?

[dhouston]

The schematics for both the TW523 and PL513 are in the <A HREF="ftp://ftp.x10.com/pub/manuals/technicalnote.pdf">technicalnote.pdf</A> available on the X-10 website.

[eleckits]

The schematics for both the TW523 and PL513 are in the <A HREF="ftp://ftp.x10.com/pub/manuals/technicalnote.pdf">technicalnote.pdf</A> available on the X-10 website.

The schematics are too complicated, do you have simple one?

[dhouston]

The schematics are too complicated, do you have simple one?

I don't know how one simplifies a schematic without omitting components. I'm afraid it is what it is. There are simplified block diagrams of both devices on p8 of the PDF.

What are you trying to accomplish? Perhaps someone can make suggestions once they know that.

[eleckits]

I don't know how one simplifies a schematic without omitting components. I'm afraid it is what it is. There are simplified block diagrams of both devices on p8 of the PDF.

What are you trying to accomplish? Perhaps someone can make suggestions once they know that.

I am looking for a schematic which is simple, because this circuit is too complicated and has many coils.

[dhouston]

Are you trying to build your own PIC-based X-10 interface to the power line? If so, there are some people here who have done that who might be willing to share if you can provide details such as power line voltage and frequency.

[eleckits]

Are you trying to build your own PIC-based X-10 interface to the power line? If so, there are some people here who have done that who might be willing to share if you can provide details such as power line voltage and frequency.

Yes, I want to do this, would you please give me one?

I appreciate your replies and your interests