Seiko EG7500B-LS Graphic LCD

Closed Thread
Results 1 to 5 of 5
  1. - 20th September 2007, 09:39 #1
    Wilson's Avatar
    Wilson
    Wilson is offline Junior Member
    Join Date
    Sep 2007
    Location
    Australia
    Posts
    15

    Default Seiko EG7500B-LS Graphic LCD

    I acquired this graphic LCD and need assistance interfacing it to a 16F877A
    and controlling it with PBP
    It is a 300x200 dot display with an 8x8 touch screen.

    The data sheet can be found following the link below

    http://pdf1.alldatasheet.com/datashe...G7500B-LS.html

    Is anyone willing to give it a try?

    Wilson
    Attached Images Attached Images  
    Last edited by Wilson; - 20th September 2007 at 10:23.
  2. - 20th September 2007, 12:38 #2
    Wilson's Avatar
    Wilson
    Wilson is offline Junior Member
    Join Date
    Sep 2007
    Location
    Australia
    Posts
    15

    Did you find this post helpful? Yes | No

    Default

    I should also mention that I will donate spare a display to tinker with.
    Sort of a reward.

    Wilson
  3. - 20th September 2007, 15:26 #3
    Dave's Avatar
    Dave
    Dave is offline Prolific Poster
    Join Date
    Mar 2003
    Location
    Commerce Michigan USA
    Posts
    1,166

    Did you find this post helpful? Yes | No

    Default

    Wilson, Do you have the required 20 volt supply for the backlight with it? Also what are you planning on doing with the display?

    Dave Purola,
    N8NTA
  4. - 21st September 2007, 00:07 #4
    Wilson's Avatar
    Wilson
    Wilson is offline Junior Member
    Join Date
    Sep 2007
    Location
    Australia
    Posts
    15

    Did you find this post helpful? Yes | No

    Default

    The display was removed from redundant equipment. The inverter for the backlight was mounted inside the equipment but has been discarded. Sorry.


    Wilson
  5. - 21st September 2007, 14:54 #5
    Dave's Avatar
    Dave
    Dave is offline Prolific Poster
    Join Date
    Mar 2003
    Location
    Commerce Michigan USA
    Posts
    1,166

    Did you find this post helpful? Yes | No

    Default

    Wilson, PM me and I will be glad to help....

    Dave Purola,
    N8NTA
« Previous Thread | Next Thread »

Similar Threads

  1. Is this code not initialising the LCD properly?
    By Platypus in forum mel PIC BASIC Pro
    Replies: 8
    Last Post: - 30th January 2010, 19:14
  2. 16f688 LCD what have I done wrong
    By spitfiredriver in forum mel PIC BASIC Pro
    Replies: 6
    Last Post: - 8th August 2009, 19:54
  3. Play with LCD on PICDEM
    By The IceMan in forum mel PIC BASIC
    Replies: 5
    Last Post: - 22nd August 2008, 16:56
  4. Need help with LCD number display.
    By Steve Matson in forum mel PIC BASIC
    Replies: 8
    Last Post: - 26th June 2007, 23:07
  5. LCD will not start
    By btaylor in forum mel PIC BASIC Pro
    Replies: 49
    Last Post: - 24th May 2007, 02:30

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules