Press F8 for MrSafe mode.
Well, for I2C, you would use I2CWRITE, instead of SEROUT.
The SDA and SCL can be on almost any pin. Just specify them in the I2CWRITE statement.
P.S. Don't forget the 4.7K Pull-ups on SDA and SCL.
<br>
|
Press F8 for MrSafe mode.
Well, for I2C, you would use I2CWRITE, instead of SEROUT.
The SDA and SCL can be on almost any pin. Just specify them in the I2CWRITE statement.
P.S. Don't forget the 4.7K Pull-ups on SDA and SCL.
<br>
DT
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks