Microcode studio loader problem

[Darrel Taylor]

Not sure if it's the same thing or not, but BrianT was having a similar problem and found something that worked. (I think)

http://www.picbasic.co.uk/forum/show...highlight=com1

_

[woodygjw]

Well, I did look at that thread and I do have sorta the same problem. My loader does not work either outside of Microcode studio, but everything works within it (including the loader.) But my registry does show both ports, BrianT's had his com1 missing.

I emailed David Barker a few days ago, I will wait to see if he says anything...

Greg