System Wide Clock?

[SOMRU]

Well the BFH "Bottle of Fermented Hops" didn't hurt or help. But was enjoyable.

I gave in guys...

Tacked on some crystals and caps, trimmed some traces, and I'm up and running.

Started out with 20Mhz @ 4v PK2PK. Was getting about 1v drop for each pic in series or parallel. The pics start failing at 2.8v pk2pk.

I will not let this drop. I am just on a really tight schedule.

Thanks for the help so far.

[Art]

You can use a 74HC04 to distribute clock signal.
Like in this schematic:
http://www.picbasic.co.uk/forum/atta...4&d=1060366548
there is two pics, only one clock. More pics could be added.

[SOMRU]

thanks...

Possibly in the "NEXT GENERATION" upcoming.

How much SNYCH is really needed?
Not much for this application. But need for a solid timing freq is.


THANKS AGAIN