Anyone used a WAVECOM gsm modem ?

[rodrik]

Yes I have a lot of experince send me your mail I will send you pictures I dont know
how to upload pictures here

[Angus Anderson]

Hi Guys-

I've used Wavecom modules in the Falcom Tango Module. Also the Telit modules, which I have a project with on at the moment. There are a few things to consider. If you want to use the available programming aids with these modules, and thus avoid using an external microprocessor, then consider that Telit uses the Python interpreter and the Wavecom modules have a whole development platform called Open AT based on 'C'. This is powerfully supported, and probably not for beginners. If you want to start by using just the AT command set for the modules, then probably the cheaper Telit solution would do for a start. Also the the Telit version of the Python language is easy to learn.

Good luck

Angus

[isaac]

Thanks guys for all your replies.
i got the module for £40 so i am just wait for it to be delivered would keep you all posted.
am only going to be doing basic sms controlled like turning relays on etc.
not sure if its possible to do large data transfers Lo:

Isaac