I've been using WinPic800 to program PIC18LF4620 using my PC's serial port. It's working fine. I used JDM programmer as the hardware settings. I connected the PC to the programmer using DB9 to ICSP cable. I'm thinking of getting myself a development board with PIC18LF4620. The board comes with ICSP connector that uses PGC, PGD, /MCLR, 3.3Vdc and GND to connect to the PIC and program it. I'm wondering whether will I be able to use the JDM programmer settings using a DB9 to ICSP cable to program the board. The board is going to cost me a huge sum of money and I wanted to be sure that I have the necessary tools to program it. Thanks!