Very Simple ICSP Programmer

Results 1 to 40 of 130

Threaded View

  1. - 4th April 2005, 20:35 #11
    NavMicroSystems's Avatar
    NavMicroSystems
    NavMicroSystems is offline Senior Member
    Join Date
    Feb 2004
    Location
    Germany
    Posts
    762

    Did you find this post helpful? Yes | No

    Default

    Joe,

    the PIC-PG2 is a JDM-type of programmer and will (most likely) NOT work on a 5V COM-Port !!

    If you had told us you are working with a 5V COM-port,
    we would have told you that the method you are trying is not going to work.

    You must tie RB4 on the F628 to GND (or at least pull it low)
    and you must apply high voltage (~13V) to the Vpp pin to make it work.

    The links posted on this thread would have given this answer.
    Last edited by NavMicroSystems; - 4th April 2005 at 20:48.
    regards

    Ralph

    _______________________________________________
    There are only 10 types of people:
    Those who understand binary, and those who don't ...
    _______________________________________________


« Previous Thread | Next Thread »

Similar Threads

  1. Melabs U2 Programmer Command Line Options
    By Robert Wells in forum General
    Replies: 5
    Last Post: - 3rd July 2009, 03:11
  2. Soic Icsp
    By earltyso in forum mel PIC BASIC Pro
    Replies: 4
    Last Post: - 13th September 2008, 20:51
  3. Need a programmer? And, ICSP - Effects on rest of circuit?
    By Rifraf in forum Schematics
    Replies: 1
    Last Post: - 11th December 2007, 00:57
  4. problems with USB programmer
    By malc-c in forum General
    Replies: 7
    Last Post: - 10th May 2007, 21:14
  5. USB programmer problems
    By uiucee2003 in forum USB
    Replies: 2
    Last Post: - 16th August 2006, 00:47

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules