sms send & recieving using pic16f84

[ruwan]

i can find a sonyerriction t10 phone.
ser in 2 and ser out 2 is enough
please send to me for this project item list.i can collect.
i followed pic programing short course and i can program led circuit and,7sigment ,
there for i can do this project on ur help.
thank you.

[PoTeToJB]

hello..

that time i built this project i dont know about Pic and Programming. just study and learn for other people topic... so u more good that me... heeheee

t10 can use but the modem time is hex mode. that u must convert the hex kod.
That more easy if can find modem with support text mode...

can u describe about your project

[GioppY]

If your message do not change, you can store it in the sim card and send with the "AT+CMSS=" command.
Regards
Gianni

[ruwan]

i want to do.
my home unit (include t10 phone & pic 16f84 )pic 16f84 ic portb.0 input some signal again i need to know that signal through sms to my hand phone.
and i send sms my home unit again pic portb.1 high (out put signal)

i am sorry to late my reply because my computer problem.
thank you.

[ruwan]

hello.

want to do.
my home unit (include t10 phone & pic 16f84 )pic 16f84 ic portb.0 input some signal again i need to know that signal through sms to my hand phone.
and i send sms my home unit again pic portb.1 high (out put signal)

i am sorry to late my reply because my computer problem.
thank you.

[GioppY]

Did you see this?
http://www.picbasic.co.uk/forum/showthread.php?t=4425

Regards

[ruwan]

thank you mr gioppy.
i following that forums.ican,n understand quekly.i will try it

pic basic and pic basic pro are same lanauge.
thank you

[ruwan]

hello.
can you write me simple exmple.this one.i want to automaticaly send massag "hello" .16f84 portb.0 input signal.
(tell me first i am this masage save in phone.then i writ program pic using at command.then send phone using data reciving pin)
sorrey for my bad english.

[ruwan]

thanks for all.to help me.