Dear friends:
I have an application with the 16f685 and 16f690 and I use this configuration:
@ DEVICE pic16f685 , bod_oN 'BOD Reset at 2.0 Volts.
@ DEVICE pic16f685 , INTRC_OSC_NOCLKOUT
@ DEVICE pic16f685 , pwrt_on
@ DEVICE pic16F685 , PROTECT_ON
@ DEVICE PIC16F685 , MCLR_OFF 'internal reset
I use the Mclr pin as input with a button and pullup, but tho micro resets when I push the
button to ground. I am working with 3.3v .
All works OK, except the input button.Any ideas...?
Thanks in advance.
Ruben de la Pena