question 1
is it posible to move all that code to background, in some inc,bas, or whatewer file(s), so we half-begginers can do clean portion of user.pbp using some http site for management... ...That "main"(user) file don't have to be in master focus, it is more then well have 10 pass per seccond,(more is beter..)(other uProc strnght can bee lost in included files loops) and maybe some interupt driven uart buffer needed...
you know what I mean.... i know, for you freaks this is piece of cake, for me SF.

question 2
how could we put web_stuf in sd/mmc? this shudn't bee in fat mode, can be raw or anything... maybe using file2bin from tcp/ip stack utilitty... I have @home at leest 12 sd cards, and whan i saw cheap trick with 1 or 2 x 8 pin ribbon connector sticked with more cheap sd-card iex.16Meg...blahblah
can u provide some sample/demo code how to implement this in PBPL and TCP/IP demo... ?

question 3
is it too complicate, or processor_owerkilling (or mision impossible) to put rtl8019 with 18f452 (or 3com509+18f452) in pbp http storry... that crap of chip's i have a lot...
so for us with good nervs and low programming knowledge, could be very inexpensive solution....