How to compare strings/array? RFID Project

[astanapane]

Hi Joe,

i would also like to specify that the tags i have there are manchester encoding. Do i have to decode it through the program in order to work?

I dont know how to decode it. As from the page here http://www.sparkfun.com/products/10169 these are the features
Features:

EM4001 ISO based RFID IC
125kHz Carrier
2kbps ASK
Manchester encoding
32-bit unique ID
64-bit data stream [Header+ID+Data+Parity]

From what you are saying now:

i have already change the buf/10 to 12 but nothing happens.

If you see the site in here http://melabs.com/resources/ser2modes.htm , there is a 4Mhz which i use at them moment.

There are several numbers in there included the 84. The number 84 seems to read the data at 9600.

Here is an other example of the code http://melabs.com/samples/PBP-mixed/ser2mod.htm

Serin2 pinin,396,[WAIT("F"), STR test8\8]

   Serout2 pinout,396,["14: ",STR test8\8,13,10]   ' 15: 7ZZ-0001

' Waits for the string "F", then collects the next 8 characters.  These are

' stored as ascii in 8 locations of the array variable test8.  The SerOut2

' statement uses the same modifier to send all 8 locations of the array

' variable as an ascii string.

   Serin2 pinin,396,[WAIT("Z",45), STR test8\8\"0"]

   Serout2 pinout,396,["15: ",STR test8\8,13,10]   ' 16: F7ZZ-

' This example demonstrates how you can put multiple characters in the

' WAIT.  It waits for the string "Z-", since the ascii code for "-" is

' 45.  The STR item is the same as above except we have added the stop

' character "0".  When it encounters "0" at the sixth character, it

' replaces it and fills the rest of the test8 array with null characters.
 
   Pause 2000

   Goto mainloop
 
   End