PIC powered by capacitor for 0,5 second

[BobEdge]

Hi,

If you have not done so already try turning off the brown out detect at the programming stage, this will stop the pic from resetting as the voltage drops. With a 2200uF cap that should work fine

Regards
Bob...

[Luciano]

Hi Alain,

Thank you for appreciating my midnight engineering!

Best regards,

Luciano

[Luciano]

Hi Roger,

Try that:



Best regards,

Luciano

EDIT: The Brown-out Detect Voltage (BVDD) is 2.025 — 2.175 V.
Try first with the internal Brown-out Detector enabled.