Hello Mark,

One other thing,

That pause statement is 1 second long. I used this, to make sure that the receiver read the data.

You might be able to experiment with that pause statement and find that "PERFECT" Pause, so that both the Reciever reads the data, and the output to the LCD works. (I don't know your setup, so I don't knwo what you are trying to accomplish).

Try lowering the pause to
Pause 1

if it still works,

Pauseus 500

if it still works

Pauses 250.

And keep dividing in half.

Soon it will stop working... and you have a range to play with. You may find that if you have a pauseus between (lets say) 100 and 150 both receiver and LCD will work.

Why? because the pause is long enough for the receiver to work, and long enough for the LCD to work.

Another idea, is have your receiver check for something other than B0. Why? because the reciever will know that the data is LCD data, not its data. As soon as the Reciever sees its different than B0, it knows its good data, and can process it. Then you can happily have a LCD and your receiver working at the same time.