interfacing HT1628 with pic ?

[MR2010]

im trying to send command and data to HT1628,anyone can help me i dont understand its datasheet and what i use shiftout or i2cwrite,please help about command and address,

http://www.chinaelite.com/pdf/HT1628.pdf

[wolwil]

what i use shiftout or i2cwrite

You would use SHIFTOUT because it is a serial interface not an I2C.

[MR2010]

thnks wolwil , ive tryed this code but nothings happening,any idea how to address this ic

DPIN    VAR PortB.0                 
CPIN    var PortB.1
STB     VAR PORTB.2              
B0      var     byte 
B1      var     byte



main:
low STB
pauseus 1
b0 = $01 

                        
     shiftout DPIN,CPIN,1,[$00,b0]  
     Pause 100               
     shiftout DPIN,CPIN,1,[$03,b0]
     high STB


        end

[wolwil]

                   
     shiftout DPIN,CPIN,1,[$00,b0]

At a quick glance I believe you have to send the LSB first according to the Datasheet and you are sending the MSB first. On the bottom of page 6 it shows the LSB being the first bit being clocked in.

Try changing the mode on your shiftout to a 0 like this:

     shiftout DPIN,CPIN,0,[$00,b0]

[MR2010]

thank you wolwil for helping me , got it working now im trying to sort characters, have a great time wolwil ...