Dead PICs


Closed Thread
Results 1 to 17 of 17

Thread: Dead PICs

Hybrid View

  1. #1
    Join Date
    Oct 2004
    Location
    Hangover, Germany
    Posts
    289


    Did you find this post helpful? Yes | No

    Red face

    I see no 100nF C near the PIC.

    What is about the 22uF-Cs near the optocouples ? What should they do ?
    PBP 2.50C, MCS+ 3.0.0.5, MPLAB 8, MPASM 5.14, ASIX Presto, PoScope, mE mikroBasic V7.2, PICKIT2

  2. #2


    Did you find this post helpful? Yes | No

    Default

    Quote Originally Posted by BigWumpus View Post
    I see no 100nF C near the PIC.

    What is about the 22uF-Cs near the optocouples ? What should they do ?
    There are four 0.1uF capacitors in the circuit that are not shown on the schematic. One is located on the output from the 78L05, another is on the output from the 7812, another one is on the power pins right at the PIC and the last one is located right beside the OP-Amp.

    The 22uF are there to keep the PIC inputs from cycling on and off caused by the AC voltage used for the inputs.

Similar Threads

  1. Communicating between two PICs over DC bus
    By elec_mech in forum mel PIC BASIC Pro
    Replies: 2
    Last Post: - 7th May 2009, 12:57
  2. connect two pics
    By soki in forum mel PIC BASIC Pro
    Replies: 28
    Last Post: - 23rd September 2008, 06:29
  3. Retrieving infos from multiple PICs on a bus/chain
    By flotulopex in forum mel PIC BASIC Pro
    Replies: 7
    Last Post: - 15th October 2007, 04:42
  4. Programming Pins of PICs?
    By Kamikaze47 in forum mel PIC BASIC Pro
    Replies: 1
    Last Post: - 15th August 2007, 18:59
  5. Self Destructing pics? Copy protection
    By Rob Martin in forum mel PIC BASIC Pro
    Replies: 1
    Last Post: - 22nd March 2004, 09:39

Members who have read this thread : 0

You do not have permission to view the list of names.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts