LCD Module 12232F

Results 1 to 5 of 5

Threaded View

  1. - 6th August 2007, 20:11 #2
    mackrackit's Avatar
    mackrackit
    mackrackit is offline SuperMod
    Join Date
    Nov 2003
    Location
    Wellton, U.S.A.
    Posts
    5,924

    Did you find this post helpful? Yes | No

    Default

    If I remember right the 8 pin hook-up is for shifting data in/out. Have not done this myself and I have not seen on for some time.

    <img src="http://www.picbasic.co.uk/forum/attachment.php?attachmentid=1916&stc=1&d=118642546 2">

    Go here http://www.melabs.com/slcd/index.htm and get the Hitachi 44780 LCD Controller Datasheet. It talks of both ways. You might be able to figure it out from there.

    Or... go the easy way and http://www.seetron.com/bpk000_1.htm Then one wire is all that is needed. If it will work for your display.
    Attached Images Attached Images  
    Dave
    Always wear safety glasses while programming.
« Previous Thread | Next Thread »

Similar Threads

  1. 16f688 LCD what have I done wrong
    By spitfiredriver in forum mel PIC BASIC Pro
    Replies: 6
    Last Post: - 8th August 2009, 19:54
  2. Play with LCD on PICDEM
    By The IceMan in forum mel PIC BASIC
    Replies: 5
    Last Post: - 22nd August 2008, 16:56
  3. GPS Tracker Project ( GPS Module + JP Module + LCD Dispaly )
    By Oldspring in forum GPS
    Replies: 1
    Last Post: - 27th July 2008, 06:14
  4. PIC16F684 + 8*2 LCD module
    By xnihilo in forum mel PIC BASIC Pro
    Replies: 3
    Last Post: - 5th March 2008, 23:38
  5. Need help with LCD number display.
    By Steve Matson in forum mel PIC BASIC
    Replies: 8
    Last Post: - 26th June 2007, 23:07

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules