LCD displaying problem..

[keithdoxey]

First of all, I wonder about this line: LCDOUT $FE,$8D, DEC speed, "km/h "
--- > $8D ??? I think you meant $80 (beginning of first line)

Then, if it's the case you can use:

If speed < 100 then X= 1
If speed < 10 then X = 2
LCDOUT $FE,$8D + X, DEC speed, "km/h"


Cleaver!

Whilst that would keep the "km/h" in the same position on the screen it WONT clear text that is previously written which is why you need to print spaces.

With the above code you would get the following

9 would give "9km/h"

49 would give "49km/h"

103 would give "103km/h"

but when the speed drops you would get the following problem due to not clearing the leading digits

87 would give "187km/h" (the "1" not being cleared)
5 would give "185km/h" (both the "1" and the "8" not being cleared)