|
Hi Richard,
something in one of those statements probably is in error, try removing individual statements until you find the one or more errors. Looking into the data sheet makes me suspect the capture compare statements.ccpmx_off. Does it compile but fail to program or does it fail to compile?
JS
If you do not believe in MAGIC, Consider how currency has value simply by printing it, and is then traded for real assets.
.
Gold is the money of kings, silver is the money of gentlemen, barter is the money of peasants - but debt is the money of slaves
.
There simply is no "Happy Spam" If you do it you will disappear from this forum.
|
Compile is okay. Programming n.g.
|
Joe, Okay.... I tried your suggestion. The item that causes the programming failure is: intrc_osc_noclkout
Do you see anything wrong with this?
Richard
|
Hello Dick,
I notice there is an added space in the lvp_off config in the second line (you have: lv p_off). Could this be the problem?
Andy
|
Hi Andy,
The extra space in lvp was added automatically by this forum's editor software. The space is not there in the actual program. Otherwise, the program would not compile. Thanks for the observation.
Richard
|
Update: I think the error message I'm getting is an anomaly of the PICkit firmware. Reason: The programmed 819's work correctly in my application even though the above programming error message appears at programming time.
I'll check with Microchip Support for their advice.
Richard
|
I still use the PICKIT1 for little things. If I use the PICKIT and import the hex the same happens, but the device works.
If I use MPLAB and the PICKIT everything works like it should.
Maybe the same with 2.
Dave
Always wear safety glasses while programming.
|
Hi Richard,Originally Posted by Dick Ivers
Try using it this way using PM as assembler, I'm still trying to get MPASM version to compile.
Code:@ DEVICE PIC16F819, INTRC_OSC_NOCLKOUT, WDT_OFF, LVP_OFF, PWRT_OFF, PROTECT_OFF, MCLR_OFF, BOD_OFF @ DEVICE CPD_OFF,CCPMX_OFF,DEBUG_OFF,WRT_OFF
If you do not believe in MAGIC, Consider how currency has value simply by printing it, and is then traded for real assets.
.
Gold is the money of kings, silver is the money of gentlemen, barter is the money of peasants - but debt is the money of slaves
.
There simply is no "Happy Spam" If you do it you will disappear from this forum.
|
Programmer fixed with the following changes as suggested by Microchip support:
1. Upgrade PICkit 2 programmer software to v2.40
2. Under "Tools" set "Use Vpp First Program Entry"
3. Set Vdd PICkit2 "ON"
4. Set voltage to 5.0
Richard
|
same problem
I have the same prob.
But his solution dosn't work for me. heres my inc file for this device
NOLIST
ifdef PM_USED
LIST
"Error: PM does not support this device. Use MPASM."
NOLIST
else
LIST
LIST p = 18F4682, r = dec, w = -311, w = -230, f = inhx32
INCLUDE "P18F4682.INC" ; MPASM Header
__CONFIG _CONFIG1H, _OSC_ECIO_1H ;_OSC_XT_1H
__CONFIG _CONFIG2H, _WDT_ON_2H & _WDTPS_512_2H
__CONFIG _CONFIG3H, _MCLRE_ON_3H & _PBADEN_OFF_3H
__CONFIG _CONFIG4L, _XINST_OFF_4L & _LVP_OFF_4L
NOLIST
endif
LIST
EEPROM_START EQU 0F00000h
BLOCK_SIZE EQU 64
I even tried external +v5 with the pickit 2
I have updated both firmware and software. i just got this programmer a week ago and have only tried it with a few chips. it seemed to work fine with those, but with a 18f4682 its a no go. keeps saying verification of configuration bits failed.
any ideas ???
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks