Help with code

[xobx]

Thats what im doing..

Casue this the source code, right?
http://img529.imageshack.us/img529/6991/coderm3.jpg

[skimask]

Thats what im doing..

Casue this the source code, right?
http://img529.imageshack.us/img529/6991/coderm3.jpg

Yes, but what are you doing to that source code that should cause it to change between compilings?

[xobx]

What?

I first made a easy program that only made RB1 "blink" and I compiled it and transfered it over..

Then I made this code and when I compiled it the hex file still had the old easy program.

@   device  pic16F648A, hs_osc, wdt_on, mclr_on, lvp_off, protect_off
DEFINE OSC 20
        
loop:   

        high portb.0
        pause 250
        High portb.1
        pause 250
        high portb.2
        pause 250
        low portb.0
        pause 250
        low portb.1
        pause 250
        low portb.2
        pause 250
        goto loop
        
        
        
        end

So the Problem is: if I change the source code and compile it doesnt update the hex file.

[skimask]

I first made a easy program that only made RB1 "blink" and I compiled it and transfered it over..
Then I made the code I just posted and when I compiled it the hex file still has the old easy program.
So the Problem is: if I change the source code and compile it doesnt update the hex file.

So, the old hex file and the new hex file are exactly the same size and have exactly the same contents, just a different date/time stamp?
What does the bottom of the screen say when it's done compiling...if anything?

[xobx]

Yes, it exactly same as the old one..

You can see how it changes:
Compiling > Assembling > Success: 82 words used.

[skimask]

Yes, it exactly same as the old one..

You can see how it changes:
Compiling > Assembling > Success: 82 words used.

Ok, so the one file with portb.0/portb.1/portb.2 has 82 words used.
What happens to the same program if you comment out everything under 'loop:' and above 'goto loop', then recompile it?

[xobx]

I just found out that if I change something in this the hex file changes

 @   device  pic16F648A, hs_osc, wdt_on, mclr_on, lvp_off, protect_off
DEFINE OSC 20

But if I change something in the rest off the code the hex file doesnt change..

:/

[xobx]

I restarted my computer and now does it work :/

Wierd!