PIC18F452 to PIC18F442
Hi sanguine,
About your project:
Describe what you want your project to do.
List what data sheets you have tried to read.
Post your code. As if it was for a PIC18F452 (use VB to put it in a “code box”)
Maybe someone could help translate it for the PIC18F442.
Post your schematic.
List any books or sites you are using for reference.
About your tools:
Which BASIC editor.
Which MELabs compiler; PICBASIC Compiler (PBC) or PICBASIC Pro (PBP)
Development board, printed circuit (wiring) board (PCB), Solder-less bread board.
Oscilloscope available.
Time available.
About your PIC:
Internal oscillator, crystal, resonator, external oscillator, speed
MCLR resistor, software disabled
Configuration Fuses (PIC Defines) Configuration Bits
Pull-up resistors
Capacitors; Vdd to Vss, on crystal to ground.
What is done with the unused pins.
-Adam-
Originally Posted by sanguine
Bookmarks