8x2 Lcd

[paul borgmeier]

Use 0 if your four data lines are RA0-RA3
Use 4 if your four data lines are RA4-RA7 (but this will not work as noted above)

If you still have issues, you might want to post a schematic and the rest of your code (if there is more) - more and better info usually means more and better help

Good Luck

[rshaver]

Thanks for the help.. It is up and working. Don't really know what happened. The code looks the same except for:

DEFINE LCD_LINES 2
ANSEL = %00000000

and:

Define LCD_DBIT 0

I had tried the LCD_DBIT 0 before but no help.. And ANSEL =%00000000. So maybe the LCD_LINES 2... I did not think that made a difference. But I greatly appreciate the help. It made me look at things and I did learn some more.

Ron