Control BH1415 with a 16f88

[savnik]

Do you not have the bh1415f datasheet?
It explains how to set the frequency in there...all easily done with PBP's SHIFTOUT commands...

bits 0 - 15
1,0,1,1,1,1,1,1,1,1,0,1,0,0,1,0

bits 0-10 = frequency, in this case 102.1Mhz
bit 11 = mode, in this case stereo
bits 12-13 = phase detector operation, in this case normal
bits 14-15 = test mode, in this case normal operation

It's right there on the last 2 pages of the bh1415f datasheet from ROHM.

I have the bh1415f datasheet and i have read , but i don't know how to send the data to bh1415f , because this chip has data,clock and enable
For the TSA551 i don't have problem.I have use it many times , but this have only data and clock and use I2CWRITE SDA,SCL,ADDR1,[HI,LO,$8E] to send the data