no text on LCD

[mister_e]

Easier with PicBasic Pro ... yes indeed...

    '
    '    LCD setup
    '    =========
DEFINE LCD_DREG PORTB     ' LCD data port
DEFINE LCD_DBIT 0         ' LCD data starting bit
DEFINE LCD_RSREG PORTA    ' LCD register select port
DEFINE LCD_RSBIT 1        ' LCD register select bit
DEFINE LCD_EREG PORTA     ' LCD enable port
DEFINE LCD_EBIT 2         ' LCD enable bit
DEFINE LCD_BITS 4         ' LCD data bus size
DEFINE LCD_LINES 2        ' Number lines on LCD
DEFINE LCD_COMMANDUS 2000 ' Command delay time in us
DEFINE LCD_DATAUS 50      ' Data delay time in us


LCDOUT "HELLO WORLD"

There's still some mistake in your code so far... not sure it's working @32KHz anyways

V0 to to GND? not sure, should be connected to a POT wiper or PWM driven or voltage divider.