18f4550


Closed Thread
Results 1 to 16 of 16

Thread: 18f4550

Hybrid View

  1. #1
    Join Date
    Feb 2005
    Location
    GREECE
    Posts
    120


    Did you find this post helpful? Yes | No

    Default

    I did the following but nothing...
    Please H E L P ME.I DO NOT UNDERSTAND!!!!


    Why I have to change thE INC file?Why I never did it with 16f628?
    We are talking for the INC file in the pbp folder?



    ;************************************************* ***************
    ;* 18F4550.INC *
    ;* *
    ;* By : Leonard Zerman, Jeff Schmoyer *
    ;* Notice : Copyright (c) 2006 microEngineering Labs, Inc. *
    ;* All Rights Reserved *
    ;* Date : 06/05/06 *
    ;* Version : 2.47 *
    ;* Notes : *
    ;************************************************* ***************
    NOLIST
    if def PM_USED
    LIST
    "Error: PM does not support this device. Use MPASM."
    __CONFIG _CONFIG1H, _FOSC_INTOSC_XT_1H <-------- add it
    NOLIST
    else
    LIST
    LIST p = 18F4550, r = dec, w = -311, w = -230, f = inhx32
    INCLUDE "P18F4550.INC" ; MPASM Header
    __CONFIG _CONFIG1L, _PLLDIV_5_1L & _CPUDIV_OSC1_PLL2_1L & _USBDIV_2_1L
    __CONFIG _CONFIG1H, _FOSC_HSPLL_HS_1H
    __CONFIG _CONFIG2H, _WDT_ON_2H & _WDTPS_512_2H
    __CONFIG _CONFIG3H, _PBADEN_OFF_3H
    __CONFIG _CONFIG4L, _LVP_OFF_4L & _ICPRT_OFF_4L & _XINST_OFF_4L
    NOLIST
    endif
    LIST
    EEPROM_START EQU 0F00000h
    BLOCK_SIZE EQU 32

  2. #2
    Join Date
    Jul 2003
    Location
    Colorado Springs
    Posts
    4,959


    Did you find this post helpful? Yes | No

    Default

    Oops, my fault. I should have been more complete with my descriptions.

    The .INC file should look like this. The 2 red lines are commented out.
    Code:
    ;****************************************************************
    ;*  18F4550.INC                                                 *
    ;*                                                              *
    ;*  By        : Leonard Zerman, Jeff Schmoyer                   *
    ;*  Notice    : Copyright (c) 2004 microEngineering Labs, Inc.  *
    ;*              All Rights Reserved                             *
    ;*  Date      : 12/31/04                                        *
    ;*  Version   : 2.46                                            *
    ;*  Notes     :                                                 *
    ;****************************************************************
            NOLIST
        ifdef PM_USED
            LIST
            "Error: PM does not support this device.  Use MPASM."
            NOLIST
        else
            LIST
            LIST p = 18F4550, r = dec, w = -311, f = inhx32
            INCLUDE "P18F4550.INC"	; MPASM  Header
      errorlevel -230
    ;        __CONFIG    _CONFIG1L, _PLLDIV_5_1L & _CPUDIV_OSC1_PLL2_1L & _USBDIV_2_1L
    ;        __CONFIG    _CONFIG1H, _FOSC_HSPLL_HS_1H
            __CONFIG    _CONFIG2H, _WDT_ON_2H & _WDTPS_128_2H
            __CONFIG    _CONFIG3H, _PBADEN_OFF_3H
            __CONFIG    _CONFIG4L, _LVP_OFF_4L & _ICPRT_OFF_4L & _XINST_OFF_4L
            NOLIST
        endif
            LIST
    EEPROM_START	EQU	0F00000h
    BLOCK_SIZE	EQU	32
    DT

Similar Threads

  1. 18f4550 usb problem.. so im getting crazy..
    By MeSaKu in forum mel PIC BASIC Pro
    Replies: 4
    Last Post: - 11th May 2009, 22:03
  2. Usb Mass Storage With 18f4550
    By wagner in forum USB
    Replies: 8
    Last Post: - 17th August 2008, 16:46
  3. 18F4550 to 18F2550
    By mpardinho in forum mel PIC BASIC Pro
    Replies: 2
    Last Post: - 28th September 2007, 23:13
  4. How can I turn off USB support in 18F4550
    By BrianT in forum mel PIC BASIC Pro
    Replies: 1
    Last Post: - 6th September 2007, 03:56
  5. USB Programmer for 18F4550 PICs
    By Kamikaze47 in forum USB
    Replies: 8
    Last Post: - 21st August 2007, 16:29

Members who have read this thread : 0

You do not have permission to view the list of names.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts