Fred's Ethernet Mini board has an ICSP header but it is designed to interface with Microchip's MPLAB. Those of us with meLabs programmers will need to make some changes to the Ethernet Mini board and build an adapter from our programmer to the ICSP header.

The latest software for the various meLabs programmers supports the 18F67J60 but modifications are needed for all but the U2 programmer as these are 3.3V devices.

This is all detailed (in part) on these pages.
http://www.melabs.com/support/icsp.htm
http://www.melabs.com/support/3v_icsp.htm
http://www.melabs.com/support/3v_icsp.htm#icsp

There is a schematic of the Ethernet Mini in the ZIP download on Fred's EDPT page.
http://www.edtp.com/download/mini/et...ni_package.zip

The details vary with the specific programmer but most require a 1K pull-up on MCLR while the Ethernet Mini has a total of 11K. They also call for a 4.7µF cap on Vddcore/Vcap. The datasheet calls for a 1-10µF cap. The Ethernet Mini has a 2.2µF cap on this pin and I'm not sure whether it will need to be changed. I'm hoping that either Fred or meLabs can answer this.