So, you can use multiple 1-wire sensors scattered all over the place and connected through one-wire only (and ground of course).
I cannot see the problem.
You will get rid off the op-amps, ADC's etc and WILL have the 0.5 accuracy.
Ioannis
|
So, you can use multiple 1-wire sensors scattered all over the place and connected through one-wire only (and ground of course).
I cannot see the problem.
You will get rid off the op-amps, ADC's etc and WILL have the 0.5 accuracy.
Ioannis
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks