After any reset the Pins will be set as input - for you, they will be tristate!
So, add the pull-down-resistor an write a good programm !
|
After any reset the Pins will be set as input - for you, they will be tristate!
So, add the pull-down-resistor an write a good programm !
PBP 2.50C, MCS+ 3.0.0.5, MPLAB 8, MPASM 5.14, ASIX Presto, PoScope, mE mikroBasic V7.2, PICKIT2
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks