I know there is a simple solution for this, but I can not find it.

I have two 16F676 both running on external 4Mhz oscillators. A TXM-433-LR-S and a RXM-433-LR-S.

I know the RF is working as I can send a "HIGH" and receive a "HIGH" and blink a LED.

I know the serial works, send a signal and blink a LED.

Problem is when serial is sent with RF.

I am using hyper-terminal to monitor the receiver. With wires I will see what I send and with out wires the first few characters will be garbage with the remaining correct.
Code:
SERIN2 PORTC.4,16468,[WAIT("9"),DEC net]
So I only want the last one.

Send
Code:
DEFINE OSC 4
Asm
    ERRORLEVEL -306
    Endasm
include "modedefs.bas"

ANSEL=%00000000
CMCON=7
PAUSE 2000

LOOP:
IF PORTC.1 = 1 THEN 
SEROUT2 PORTC.4,16468,[DEC 01010101,DEC 9,DEC 3,10,13]
HIGH PORTC.5
PAUSE 100
LOW PORTC.5
PAUSE 100
ELSE
SEROUT2 PORTC.4,16468,[DEC 010101,DEC 9,DEC 5,10,13]
PAUSE 200
ENDIF
GOTO LOOP

END
Receive
Code:
DEFINE OSC 20
Asm
    ERRORLEVEL -306
    Endasm
include "modedefs.bas"

ANSEL=%00000000
CMCON=7
net 	VAR WORD
PAUSE 2000

LOOP: 
SERIN2 PORTC.4,16468,[WAIT("9"),DEC net]
IF net = 3 THEN
HIGH PORTC.5
PAUSE 100
LOW PORTC.5
PAUSE 100
ELSE
LOW PORTC.5
PAUSE 200
ENDIF
GOTO LOOP

END
The last few characters are always the same with or with out wires on hyper-terminal.
Why is the WAIT not working with RF.

Tried different bauds, nothing.
Tried different preambles, nothing.