EPIC, Code programming error at 0000

Results 1 to 16 of 16

Threaded View

  1. - 27th May 2007, 02:01 #3
    mister_e's Avatar
    mister_e
    mister_e is offline Contributor
    Join Date
    Sep 2004
    Location
    montreal, canada
    Posts
    6,898

    Did you find this post helpful? Yes | No

    Default

    make sure you also have the Parallel port polling patch for XP.
    http://www.melabs.com/support/patches.htm#xppolling

    error @0000 is often caused by a too low MCLR/Vpp voltage while programming, it should be close to 13V. I would suggest you to measure it, and make sure you have 0.1uF capacitor installed as close as possible of your PIC Vcc line.

    You could also try to do it using the ICSP connector



    Page link
    http://www.melabs.com/support/icsp.htm
    Last edited by mister_e; - 27th May 2007 at 02:04.
    Steve

    It's not a bug, it's a random feature.
    There's no problem, only learning opportunities.
« Previous Thread | Next Thread »

Similar Threads

  1. decoding quadrature encoders
    By ice in forum mel PIC BASIC Pro
    Replies: 93
    Last Post: - 28th February 2017, 09:02
  2. Code programming error at 0000
    By goldscott in forum General
    Replies: 41
    Last Post: - 9th May 2012, 05:16
  3. Making Program Code Space your playground...
    By Melanie in forum Code Examples
    Replies: 15
    Last Post: - 19th July 2008, 08:26
  4. Writing code for battery operated projects
    By jessey in forum mel PIC BASIC Pro
    Replies: 15
    Last Post: - 16th June 2005, 03:39
  5. Line following robot... problems with some code
    By nepstar in forum mel PIC BASIC Pro
    Replies: 0
    Last Post: - 24th March 2005, 01:10

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules