Serout2 pic18f2620

[skimask]

' hserout["123 ",13,10]

serout2 PORTA.0,194,["123 ",dec Temp,10,13]

I don't think your 'SEROUT2' mode value is set correctly. You have the SEROUT2 command set up for 4,673 baud, driven output, no inversion, no parity.
Check the PBP manual (Section 5.74 and Appendix A) for the correct method to determine the value required for your baud rate.
If you still can't get it work, let us know...