can someone help me with RCTIME

[T.Jackson]

Gotta be a Time Machine. Just has to be. This would be about the only use for RCTIME.

[mister_e]

Could be, but why i'm asking is that many use RcTime to read a POT, while using the ADC is much efficient and don't need any extra capacitor.

Let's see...

[T.Jackson]

Yeah - RCTIME is a bit inadequate for that, there's not enough span at the lower end. I think min is a few KΩ. Besides, relatively inefficient too, tying up a complex protocol for something so simple.

[skimask]

I could easily see throwing a few push buttons, each with their own resistor, on the same pin, with a parallel cap, and using RCTIME to figure out which switch was pressed.

[T.Jackson]

I could easily see throwing a few push buttons, each with their own resistor, on the same pin, with a parallel cap, and using RCTIME to figure out which switch was pressed.

That is a very good idea!

[gandora]

Gotta be a Time Machine. Just has to be. This would be about the only use for RCTIME.

Im starting with the basics but you discovered my evil plan! ^^